Price: $19.99
(as of Sep 13, 2024 23:51:24 UTC – Details)
Product Description
GHB Solar Charge Controller
The product can automatically manage the working of solar panel and battery in the solar system. It is easy to set up and operate.
Specifications:
Overload/Short Circuit Protection: 1.5 Times by Rated Current
DC Output Voltage: 12V
Total DC Output Current: 2A
Short Circuit Recovery Time: 10s
Open Circuit Voltage of Solar Panel: 40V
No Load Loss: 0.05W
Over Voltage Protection: 15V; x2/24V
Float Charge Voltage: 14V; x2/24V
Discharge Recovery Voltage: 12V; x2/24V
Over-Discharge Voltage: 10.5V; x2/24V
Working Temperature: -35~55°C
Solar Charger Controller
No matter at home or on the road, the GHB solar charge controller operates fully automatically, easy to operate.
Safety Instructions:
1. Make sure your battery has enough voltage for the controllers to recognize the battery type (12V/24V) before installation.
2. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. (NOT suitable for Li batteries, Ni-MH battery)
3. Only suitable for working with photovoltaic solar panels. (NOT for other DC or AC power source)
Easy to Operate
1. Connect the battery to the charge regulator – plus and minus.
2. Connect the solar panel to the regulator – plus and minus.
3. Connect the load to the charge regulator – plus and minus.
NOTE: The reverse order applies when deinstalling! An improper sequence order can damage the controller!
Dual USB Charging Output Inter
Dual USB output (1A, 2A), this solar charge controller can simultaneously charge or supply power to two mobile phones, tablet PCs and other devices that require 5V power.
Fully Automatically
Makes you use 100% Available Solar Power. (Note: The battery cable should be as short as possible to minimize loss.)
Provide Full Protection
Over-load protectionShort circuit protectionLightning protectionUnder-voltage protectionOver-charging protectionReverse Polarity protection
LCD Screen Display: This solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient
Fully Automatic: This solar panel regulator with output switch, easy to operate. The battery indicator light on the controller will be on if successfully connected
Power-efficient:Microcontroller digital accuracy,when solar panel regulator is charging, the arrow between the panel icon and the battery icon will flash fastly, when the battery was a full charge,it will be slow flashed,will stop charging
Rated Discharge Current:20 A; USB Output Voltage:5 V;USB Output Current:1.5 A;DC Output Voltage:12 V-24 V,DC Output Current:20 A.To connect your load and the cables with the right polarity and then connect with the load output port of the controller
Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM and WPC mode, improve system efficiency and prolong the life span of the battery
The function of the solar charge controller is to protect the voltage overshoot and discharge.Available for DC lamp and phone charging.Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly
Customers say
Customers like the functionality and ease of installation of the controller. They mention it works well, is easy to wire, and has good instructions. Customers are also satisfied with the value for money, information display, and display quality. However, some customers have reported that the display is almost impossible to read in daylight. Opinions are mixed on the battery life and build quality.
AI-generated from the text of customer reviews
Reviews
There are no reviews yet.